Menu
Cart 0

Fiberdyne Labs Sm Dx BIF 2.0mm LC/APC-SC/APC, 30m; Part #F9C21RGCNB030MY-TR

Confluent Technology Group

  • $ 1500

Stock Available 4

Description:   

Fiberdyne Labs

Sm Dx-Singlemode Duplex, BIF-Bend Insensitive Fiber, 2mm width, 30 meters length, LC/APC-SC/APC
green connectors, white boots; OFNR- Optical Fiber Nonconductive Riser; RoHS Compliant;

RoHS Compliant- RoHS is a product level compliance based on the European Union's Directive 2002/95/EC, the Restriction of
the Use of certain Hazardous Substances in Electrical and Electronic Equipment (RoHS).

Singlemode is typically used in long-haul network connections spread out over extended areas--longer than a few miles. Singlemode cable features a 9-micron glass core. Duplex cable consists of two fibers, usually in a zipcord
(side-by-side) style.  B/I stands for bi-directional data transfer, or a communications mode that is transmitting data in both directions(send and receive) but not at the same time.

BIF- Bend Insensitive Fiber- Optical fiber is sensitive to stress, particularly bending. ... An optical "trench" - the term used for a ring of lower index of refraction material - was built into the fiber to basically reflect the lost light back into the core of the fiber.  This fiber can be bent or stapled without loss of connection, etc... and without damage to the cord.  

OFNR- Optical Fiber Nonconductive Riser- This is a cable containing only glass fiber with no copper conductive elements. It is generally intended for vertical runs between floors as part of a fiber backbone. This type of cable complies with the Underwriters Laboratories (UL) fire safety test Riser/1666.

LC/APC- LC or Lucent Connectors are about half the size of SC connectors, 1.25mm diameter ferrule.  APC stands for
Angled Polished connector, which prevents back-reflections.  It is usually used in analog fiber optic system equipment, 
such as CATV or Satellite.  These connectors are green in color over jacketed boots.


SC/APC- SC is a type of fiber optic connector with snap (push-pull coupling) coupling type and a 2.5 mm diameter ferrule, which is popularly used in single mode duplex system for its high performance and accurate alignment.   APC stands for Angled Polished Connector.  This angle prevents back-reflections which will seriously degrade the performance of any analog fiber optic system, such as CATV and Satellite.   SC/APC connectors are also green in color over white jacketed boots.

Part #F9C21R2GCNB030MY-TR

We Also Recommend