Analog Cable Program Distribution
Composite video and balanced audio outputs can be connected to analog modulators for analog cable distribution. Four mono audio channels or two stereo pairs are available for primary audio programs, as well as secondary audio programs (SAP). For example, primary program audio could be carried on one of the stereo pairs, while SAP audio is carried on the other stereo pair.
Digital Cable Program Distribution
Uplink-addressable transport output provides MPEG program streams for digital tier program delivery, so quality video programs can be distributed efficiently to households equipped with digital set-top boxes.
Digital Program Replacement
Digital program replacement (DPR) allows programmers to transparently switch their primary service to an alternative service in the digital domain in blackout applications for cable digital tier distribution. This feature remaps the packet identifier (PID) information from the primary service to an alternate service, allowing downstream devices to continue to operate seamlessly. This helps make alternative programming available in the digital tier without operator intervention.
Cable Headend Advertisement Insertion
For flexible advertisement insertion configurations, this receiver provides four types of outputs:
Dual-tone multifrequency (DTMF) cue tone
Cue trigger support, with eight open collector outputs
One programmable contact closure
Digital program insertion (DPI) messaging using Asynchronous Serial Interface (ASI) output
Low-Speed Data Output
Asynchronous utility data (up to 38.4 kbps) is available through an RS-232 interface.
IP Data Output
IP data can be received and output at rates up to 50 Mbps.
Main Features
• Four L-band inputs
• PowerVu conditional access with Data Encryptions Standard (DES) or Digital Video Broadcasting (DVB) descrambling
• Support for Basic Interoperable Scrambling System (BISS) conditional access
• 4:2:0 NTSC and PAL (B, G, I, D, M, and N) video decoding
• Aspect ratio conversion (4:3, 16:9 and 14:9) with Active Format Descriptor (AFD) control
• MPEG and Dolby Digital (AC-3) audio decoding
• Four audio outputs providing either two stereo pairs (four mono channels) of balanced audio each with the ability to use part of their output for applications such as SAP, DTMF, etc.
• Line 21 closed caption and V-chip support
• Utility data via RS-232
• IP data output up to 50 Mbps over Ethernet
• DVB VBI (WST, WSS, and VPS)
• PowerVu VBI, including North American Broadcast Teletext Standard (NABTS) and World System Teletext (WST)
• DVB or Imitext subtitling
• DTMF cue tone and cue trigger outputs for advertisement insertion
• Fingerprint trigger
• Field upgradeable software and security
• Front panel liquid crystal display (LCD) for control and monitoring
• 64 user-editable preset configurations
• Uplink addressable decoder output control (VBI, audio routing, DPI, and ASI output)
• Simple Network Management Protocol (SNMP) for setup, control, and monitoring
• Web browser interface for easy setup, control, and monitoring
• Digital program replacement providing uplink control of program replacement in blackout areas
Optional Features
• ASI input (up to 68.5 Mbps)
• SDI video output with embedded audio
• AES-3id digital audio output
Product Specifications
Table 1 provides product specifications for the Cisco PowerVu Model D9850 Program Receiver.
Product Specifications
Features
|
Description
|
System
|
Standards
|
MPEG-2 and DVB compatible
EN 300 421, EN 300 468
|
Demodulation
|
Quaternary phase shift keying (QPSK)
|
Forward Error Correction (FEC)
|
Variable (1/2, 2/3, 3/4, 5/6, or 7/8)
|
Tuner
|
Input level
|
-25 to -65 dBm per carrier
|
Frequency range
|
950 to 2150 MHz
|
Tuning step size
|
125 kHz
|
Symbol rate range
|
1.0 to 45 Msymbols per second
|
Carrier capture range
|
≥ ±3.0 MHz (5-45 Msym)
|
Satellites
|
C-band and Ku-band
|
Input impedance
|
75Ω
|
Analog Video Output
|
Number of channels
|
1 (2 identical outputs)
|
Video decompression type
|
MPEG-2 4:2:0
|
Output level
|
1.0Vpp ± 5%
|
Output impedance
|
75Ω
|
Video standard
|
NTSC and PAL B, G, I, D, M, and N
|
NTSC
|
0.0-4.2 MHz ≤ +0.5 dB/-0.75 dB
|
PAL
|
0.0-5.0 MHz ≤ +0.5/-1.25 dB
|
Maximum video resolution
|
720x480/576
|
Maximum video bit rate
|
15 Mbps
|
Chroma-luma delay
|
± 30 ns
|
Field time distortion
|
≤ 3%
|
Line time distortion
|
≤ 3%
|
Differential phase
|
≤ 3°
|
Signal-to-noise ratio
|
≥ 55 dB
|
Analog Audio Output
|
Number of channels
|
2 stereo pairs/4 mono channels
|
Audio decompression
|
MPEG or Dolby Digital
|
Output level
|
Balanced, adjustable audio outputs are factory set for unity gain (0 dBm out over 600Ω for 0 dBm in). Output is adjustable at the front panel by ±6.0 dB (ref.100 KΩ) and is factory calibrated to +18 dBu (at full scale).
|
Frequency response
|
±0.5 dB, 20 to 20 kHz (ref. 100 KΩ)
|
Total harmonic distortion
|
< 0.3% at 1 kHz (ref. 100 KΩ)
|
Dynamic range
|
85 dB (CCIR average response meter (ARM) weighting)
|
Crosstalk
|
80 dB at 1 kHz (typical)
|
VBI
|
• NTSC lines 10 to 22, fields 1 and 2
• Line 21 closed captions
• NABTS
• AMOL I and II (Nielsen)
• PAL lines 7 to 22, fields 1 and 2
• WST
• WSS
• VPS
|
Data outputs
|
RS-232 asynchronous data at rates up to 38.4 kbps
|
Rates
|
300, 1200, 2400, 4800, 9600,19,200, and 38,400 bps
|
Ethernet output for IP data
|
RJ-45, 10BASE-T Ethernet and 100Base-T Ethernet, up to 50 Mbps
|
Cue Trigger Outputs
|
Number of outputs
|
8
|
Type
|
Open collector
|
Cue Tone Output
|
Balanced audio output
|
-3.0 dBu ±3 dB, 600Ω
|
Output impedance
|
< 50Ω
|
Ethernet output for control and monitoring (same connector is used for data)
|
RJ-45, 10BASE-T Ethernet and 100BASE-T Ethernet
|
MPEG-2 transport output
|
EN 50083-9, DVB-ASI coaxial, 188 byte packets
|
Programmable relay output
|
Alarm or configurable to one of the 8 open-collector outputs
|
MPEG-2 transport input
|
EN50083-9, DVB-ASI coaxial, 188/204 byte packets
|
Two SDI video outputs (with embedded audio, same video channel)
|
BNC, SMPTE-259MC
|
Two digital audio Outputs (one stereo channel each)
|
BNC, AES-3id
|
Environmental/Physical
|
Operating temperature
|
0 to 50°C (32 to 122°F) (without SDI option)
|
Storage temperature
|
-20 to 70°C (-4 to 158°F)
|
Physical dimensions
|
1.75 in. x 19.0 in. x 15 in. (4.4 cm x 48.3 cm x 38.1 cm) 1U high, 19 in. EIA rack mountable
|
Weight
|
10 lbs (4.5 kg) approximately
|
Power
|
Voltage range
|
100 V to 240 V AC
|
Line frequency
|
50/60 Hz
|
Power consumption
|
50 W max.
|
LNB power on RF1
|
+13 V or +18 V at400 mA maximum
|