Product overview: The Cisco uBR10012 router is shipped with two DC power entry modules (PEMs) that provide a redundant power supply to the system. One DC PEM can provide sufficient power for a fully configured chassis so that if one DC PEM fails, the other automatically begins providing power for the entire system. The two DC PEMs provide filtered, redundant, and load-shared DC power to the Cisco uBR10012 chassis.
The DC PEMs receive a –48/–60 VDC power through two separate terminal blocks underneath each PEM. The power supplies can operate with input from –40.5 to –72 VDC with no harm; however, the input should be restricted to the nominal ranges defined to maintain safety extra-low voltage (SELV) compliance and to deliver the rated power (2400W or 3000W) at the allowed current levels. The 34-part number is different for the 2400W and 3000W DC PEMs. The 34-part number is listed on the compliance label of the DC PEM. For more details.
Condition: New
Product overview: The Cisco uBR10012 router is shipped with two DC power entry modules (PEMs) that provide a redundant power supply to the system. One DC PEM can provide sufficient power for a fully configured chassis so that if one DC PEM fails, the other automatically begins providing power for the entire system. The two DC PEMs provide filtered, redundant, and load-shared DC power to the Cisco uBR10012 chassis.
The DC PEMs receive a –48/–60 VDC power through two separate terminal blocks underneath each PEM. The power supplies can operate with input from –40.5 to –72 VDC with no harm; however, the input should be restricted to the nominal ranges defined to maintain safety extra-low voltage (SELV) compliance and to deliver the rated power (2400W or 3000W) at the allowed current levels. The 34-part number is different for the 2400W and 3000W DC PEMs. The 34-part number is listed on the compliance label of the DC PEM. For more details.
See More
Checkout now
Are you an Amazon customer? Pay now with address and payment details stored in your Amazon account.
Product overview: The Cisco uBR10012 router is shipped with two DC power entry modules (PEMs) that provide a redundant power supply to the system. One DC PEM can provide sufficient power for a fully configured chassis so that if one DC PEM fails, the other automatically begins providing power for the entire system. The two DC PEMs provide filtered, redundant, and load-shared DC power to the Cisco uBR10012 chassis.
The DC PEMs receive a –48/–60 VDC power through two separate terminal blocks underneath each PEM. The power supplies can operate with input from –40.5 to –72 VDC with no harm; however, the input should be restricted to the nominal ranges defined to maintain safety extra-low voltage (SELV) compliance and to deliver the rated power (2400W or 3000W) at the allowed current levels. The 34-part number is different for the 2400W and 3000W DC PEMs. The 34-part number is listed on the compliance label of the DC PEM. For more details.
