Product Overview: This card provides eight “programmable per port” outputs providing DS1/E1/CC or 2.048 Square Wave (G.704) compatible framed ones drive signals with fully selectable framing formats on a card-by-card basis. When a port is configured in the DS1 mode, the 6413 will drive any standard DS1 receiver through up to 655 feet of cable. Outputs allow card-to-card protection. Output jitter is less than 0.03 UI peak-to-peak (p-p) from 10Hz to 40MHz. The output pulse amplitude of 3 V ± 0.3 V peak meets AT&T CB119 and CCITT G.703 requirements. Both SF and ESF framing formats are supported, and the outputs are B8ZS compatible. Note: all ports on any single card must be set to the same format.
Condition: New
Product Overview: This card provides eight “programmable per port” outputs providing DS1/E1/CC or 2.048 Square Wave (G.704) compatible framed ones drive signals with fully selectable framing formats on a card-by-card basis. When a port is configured in the DS1 mode, the 6413 will drive any standard DS1 receiver through up to 655 feet of cable. Outputs allow card-to-card protection. Output jitter is less than 0.03 UI peak-to-peak (p-p) from 10Hz to 40MHz. The output pulse amplitude of 3 V ± 0.3 V peak meets AT&T CB119 and CCITT G.703 requirements. Both SF and ESF framing formats are supported, and the outputs are B8ZS compatible. Note: all ports on any single card must be set to the same format.
See More
Checkout now
Are you an Amazon customer? Pay now with address and payment details stored in your Amazon account.
Product Overview: This card provides eight “programmable per port” outputs providing DS1/E1/CC or 2.048 Square Wave (G.704) compatible framed ones drive signals with fully selectable framing formats on a card-by-card basis. When a port is configured in the DS1 mode, the 6413 will drive any standard DS1 receiver through up to 655 feet of cable. Outputs allow card-to-card protection. Output jitter is less than 0.03 UI peak-to-peak (p-p) from 10Hz to 40MHz. The output pulse amplitude of 3 V ± 0.3 V peak meets AT&T CB119 and CCITT G.703 requirements. Both SF and ESF framing formats are supported, and the outputs are B8ZS compatible. Note: all ports on any single card must be set to the same format.
